AAP01 AN94 ABAKAN KIT HPA READY

Here it is, the first aap01 AN94 body kit. I designed it for a friend of mine for being used in his aap01 airsoft replica: I worked the 3d based on libraries and photographies I found online while trying to keep the right proportions and since it's an adaptation kit for a pistol it might not be 100% accurate but still very similar to the real deal.
It uses the stock Glock magazine, the ak mag is aestethical, iron sights work.
You need some m3 and m2 bolt-nuts, and some glue and it's quite easy to assemble.
Upper and rear parts attach directly to the aap01 body with bolts, AAP01 200MM+ barrels are suggested for better precision and to eventually prevent some bb jam during faster movements.
All you need to do is printing all the body parts and put your AAP01 in it and attach the remaining parts over it. Some sanding and glueing might be required to make stronger bonds and a better fitting, almost everything should be printable in under 220mm bed so it can be printed in medium-small sized printers.
Meant for airsoft use only.

ADDED a new stock to fit a 185x61mm hpa gas tank. Files are HPA stock 61x185mm can and HPA buttstock 61x185mm can. All you need is an HPA adapter and fit the air hose inside the stock from the bbu cover lower side and the gas tank has to be put from the buttstock side, then you can attach them together.
ADDED as a BONUS a new 20mm rail to fit over the rear bbu cover-rear receiver to fit alternative sights-gear. It needs 2 longer bolts that attach to the aap01 receiver.
ADDED A V2 outer barrel with stopper to keep the AAP01 firmer in the receiver, I suggest to print this version.