V1 - ULTRAKILL - ARTICULATED FIGURE DUMMY13 COMPATIBLE BY 3DNUEVO

REVOLVER: https://www.printables.com/model/1338619-revolver-ultrakill-dummy13-dummy-13

V1 - ULTRAKILL - ARTICULATED FIGURE DUMMY13 COMPATIBLE BY 3DNUEVO

Compatible with hands and accessories of dummy 13 (scaled to 100%)

Fully functional articulated figure. All the pieces snap together, if it feels loose then resize it in the laminator or use some superglue

It is recommended to print in good quality PETG or PLA+ filament

Size: 140mm approx; The size is equivalent to dummy13 scaled to 100%.

The material consumption is approximately 43g approx and the printing time is 6H on bambulab A1 mini (it can be less if the parts are printed on more machines).

The assembly is easy. You can use the photos to guide you. It is Recommended to use pliers to fit the joints.

Elbows and Knees

Insert a piece of filament and gently press the ends with pliers several times, deforming them until they form a rivet. A piece of ABS would work best; remember that pressing too hard could break the piece.

Improve joint fit.
Inside each joint gap, including the waist and knees, you'll find a groove. This groove is the exact thickness to insert a piece of TPU filament approximately 1 mm long; in some cases, it's less. For the torso bones, you can scale them between 101 and 103%.

Always available on Instagram as 3dnuevo to answer questions and receive suggestions to improve the design

Permissions under the Cults Standard License:
-For personal use only
-Commercial use prohibited
-Modifying, sharing, or selling the files or any part thereof is prohibited

Special thanks to Millvaey who commissioned the design.