Zephyr Industries Velora Pro V4- 3D PRINTED AIRPLANE WING - Twin or Single Motor - FPV DJI O3 / O4/ Walksnail Moonlight

Updated to V4 - Wingtips, Wings, and Tails Fins are still removable but use PETG flexure fittings that snap on and off with a click. Add a piece of filament as a pin and they will not come off at all. The latest in 3D printing design. Other updates include extended motor rear motor mount which greatly reduces prop noise and many other small tweaks. The Velora is now recommended to print out of LWPLA for most parts use 8mm carbon spars throughout. You may still use 3D Printed spars or Wood spars as I have left the spar holes rectangular for adaptability to what is available in everyone's part of the world. If you use the extended wings I have now added a hole for 4mm carbon round to strengthen the 1.2m wing. The Velora is now much more complete and I hope you enjoy it. Please message me with any ideas or thoughts. Thank you

This plane is highly versatile and has many possible configurations. It can be flown as a twin puller or single pusher. It can be flown as FPV or without. Parts are replaceable and easy to switch out configurations or in case of damage!

Join Facebook Group for discussion about Velora and other models from Zephyr Industries:
https://www.facebook.com/share/g/QG34RBpyhmSxTEYX/

https://youtu.be/C9S158160bs?si=HWRsuzIpH_WqkgRC

https://youtu.be/8qAKor-czJE?si=9o0hpvI5lQ_rGKR-

https://youtu.be/FvwmvvMQjQY?si=RjMtYIg62Vpmcw6a

Please check comments for updates (i.e. updated parts, thoughts, etc)

Highlights

Discover the perfect blend of simplicity and performance in our latest RC plane:

Easy Assembly: Universal connectors guarantee perfect alignment every time.
Innovative Design: 3D printed spars for a stiff wing, with options for 8mm carbon or 5/16" basswood.
Clever Hatches: Smooth-sliding and magnetic, providing quick, secure access.
Easy Repairability: Many parts including nose cone, wings, wingtips, and tail fins can be removed using only M2 screws for simple repairs.
Adjustable Battery Placement: Sliding tray system for effortless CG adjustments.
FPV Ready: Options to integrate DJI O3 FPV or Walksnail Moonlight system components for immersive flight experience.
OPTIONAL EXTENDED WING: Print the Extended Wing 3 for an almost 1.2m span FPV Cruiser!
OPTIONAL TWIN MOTOR
OPTIONAL REAR HATCH
OPTIONAL FPV FOR O3/Walksnail Moonlight
Experience a design that makes building, flying, and maintaining your RC plane easier than ever.

Required Components

Magnets: 8 x 8mm x 3mm magnets for hatches

Screws: 2 x M3 x 12-16mm screws for motor mount, 40 x M2 self-tapping screws (M2 screw assortment set recommended)

Filament:
TPU95A for Elevon Hinges
PLA+ (~600g) for airframe
Also possible to use LWPLA for airframe to reduce weight to around 350g

Motor: T-Motor F80 PRO 2200kv Mountable with 32mm, 16mm, or 19mm spacing

ESC: 40 amp or greater

Propeller: 6040 or 7040

Battery: 4S

Receiver/Radio: Requires radio with elevon mixing

Flight Controller: SPEEDYBEE F405 MINI or equivalent

Servos: 9g servos [SG90] or EMAX ES08 (fit servo tray)

Pushrods: 1.3mm pushrod hardware with z-bend on one end and linkage stopper on other

Optional Components

Video System: DJI O3 Popsicle stick or thin wood for air unit insulation

Detailed manual included with pictures and guidelines.

Video of Earlier version of Velora Flying