1/14 RC Skid Steer SVL 97-2

This is modeled after the Kubota SVL 97-2 Compact Track Loader. The tracks are 3D printable and I am planning on adding more than one set to choose from. I did my best to model all the details of the real machine. The cab door can open and close while it is in use and I have added a accessory line to the arm for powered attachments. I plan on adding attachments for this (dozer blade, forks, bigger buckets, etc.). The bucket and attachments use a coupler like the real machines and I am also working on a quick coupler to change attachments hands free. This was designed to be printed with a 220x220 print plate with minimal supports. Included in the files are the BOM and wiring diagram for the build.

Build Videos can be found here
Part 1 https://youtu.be/GiA_Bqbujmg
Part 2 https://youtu.be/sBrESgqlQRY

Check out our Facebook group for more pictures and videos.
https://www.facebook.com/groups/659931459464021/

**UPDATE 12/10/2023
I have added some printable decals for the arms and rear panel. I also updated the Motor mount for the bucket. It now holds the motor much better and adds protection for the gears. After wiring I used some hot glue to seal the rear of the motor and mount to make sure dirt cant get inside.

**UPDATE 1/27/2024
A few parts have been modified and added
N20 Holder 1 and 2 V2 can hold a 5mm bearing
Left and Right Arm V2 can Extend and lower further
Longer Ram for the Arm extension
I modified these parts but have not printed them yet. My Skid Steer is running great and will change to these parts as needed

**UPDATE 1/27/2024
Added new "v2" arm parts to be used with linear actuators from aliexpress.