Repeating Slingshoot Crossbow Pistol Rattlesnake with Magazine Caliber12 mm

Based on an invention by Jörg Sprave, the Rattlesnake was created. The Rattlesnake is a massive tactical 3D-printed bolt action crossbow pistol with magazine for 12 mm steel bullets. One magazine has a capacity of 18 rounds and can be changed in a few seconds. It can be loaded with a 130 lbs bow and reaches high shooting energy, so it is not a toy.

It has an ar 15 grip and an ar 15 receiver for a shoulder rest a folding stock and an eyelet for a sling.

Various bolt action levers, grips and parts with a Voronoi effect are included so anyone can customize it as they wish.

The design is optimized for a 300mm x 300mm print bed.

Important:

I assume no liability for any damage or injury of any kind - use on

own risk!

I am not responsible for the consequences of the construction, possession and use of this

device!

The reliability of this build depends on their own skills and the quality of the

printed parts that they have created themselves.

The sheet used is at the discretion of the builder and has a significant impact

on the performance and can affect the legal admissibility of the construction!

I recommend the loaded parts at high lbs in ASA,PETG,or ABS filament to be

Print.

An infill of at least 30% for non-loaded parts and 100% for loaded parts.

is recommended.

It is recommended that the loaded parts, when used above 90 Lbs, be equipped with a

stronger material than PLA, such as ASA,PETG or ABS.